Description
The Jenco 6360 is a high performance pH/ORP/Conductivity/Salinity/TDS/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any PC. This meter is CE approved and features Conductivity Cells are selectable for 2 wire K=0.1 or 4 wire K=0.475 .Simultaneous test of pH 、EC and temperature measurements.
- Automatic buffer recognition of US and European buffer sets
- Selectable 2/4 wire cells for long cable length & wide measurement range
- Store 50 sets of data in non-volatile memory
- Conductivity auto range
- Power down memory backup
- Splash resistant/watertight case
- Audio feedback keys
- Battery/ac adaptor
- RS-232 (Modbus) output
Specifications
pH Range
-2.00 to 16.00 pH
pH Resolution
0.01 pH
pH Accuracy
±0.01 pH ± 1 digit
ORP Range
-1999 to 1999 mV
ORP Resolution
1 mV
ORP Accuracy
±0.1% F.S. ± 1 digit
Conductivity Range
0.00 uS/cm to 200.0 mS/cm
Conductivity Resolution
0.01 uS/cm; 0.1 uS/cm; 1 uS/cm; 0.01 mS/cm; 0.1mS/cm
Conductivity Accuracy
±0.5% F.S.
TDS Range
0.00 ppm to 200.0 ppt
TDS Resolution
0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt
TDS Accuracy
±0.5% F.S.
Salinity Range
0.0 to 80.0 ppt
Salinity Resolution
0.1 ppt
Salinity Accuracy
±1% F.S.
Temperature Range
-5.0 to 100.0 °C
Temperature Resolution
0.1 °C
Temperature Accuracy
±0.3 °C ±1 digit
pH Buffer Recognition
US (4.01, 7.00, 10.01) or NIST (4.00, 6.86, 9.18)
pH Electrode Offset (Slope) Recognition
±100 mV at 7.00 pH or –91.7 to +108.3 mV at 6.86 pH / ±30% at 4.00, 4.01, 9.18 or 10.01 pH.
pH Temperature Compensation
Auto / manual -5.0 to 100.0 °C
pH Calibration
Up to 2 points
Conductivity Calibration
1 point
Input Impedance
>1013 ohms
Reference Temperature
From 15.0 to 25.0 °C (key selectable),default 25.0 °C
Temperature Coefficient
From 0.00 to 4.00 %, default 1.91 %.
TDS Factor
0.30 to 1.00, default 0.65
Cell Constant
0.475 (4 Wire) , 0.1 (2 Wire)
Output
RS-232 or RS-232 to USB (Modbus)
Memory Storage
50 sets
Power
6 X 1.5 Volt AAA batteries or 100 ~ 240 VAC adapter.
Operating Ambient Conditions
From 0 to 50 °C, at 90 % RH.
Weight
470 grams (Including batteries)
Dimensions (W x D x H)
83 x 241 x 71 mm
Documentation and Supports
Accessories
600P
Electrodes pH
pH/reference electrode with 30 inch cable and BNC, 12mm Diameter, 0 – 14 pH, good to 80 Celsius.
Related Products
6377MB/6377BEU pH/ORP/Conductivity/Salinity/TDS/Temperature Based Bluetooth Benchtop
Benchtops CON ORP pH SAL TDS TEMP
5th generation multi-parameter pH/ORP/Conductivity/Salinity/TDS/Temperature Based Bluetooth Benchtop Meter with iOS and Android tablet connectivity Renowned accuracy and repeatability Upgraded user experience and usability Improved electrode serviceability and low cost of ownership
6312CTB
Inlines CON TDS TEMP
Dual current EC analyzer, isolated reversible transmitters, 2 or 4 wire probes, RS-485 and 2 relays.
6311
Inlines ORP pH TEMP
pH or mV analyzer, controller, 4 ~ 20 mA transmitter, RS-485, 4 on/off relays and 1 wash. relay.