6360

6360

6360M

Field or lab, dual input, pH/mV & EC/temp. meter, RS-232 Interface, EC probe with 8-pin and pH/ORP electrode with BNC.

Add this item to your custom quote page by clicking the above "add to quote" button.

Description

The Jenco 6360M is a high performance pH/ORP/Conductivity/Salinity/TDS/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any PC. This meter is CE approved and features Conductivity Cells are selectable for 2 wire K=0.1 or 4 wire K=0.475 .Simultaneous test of pH 、EC and temperature measurements.

  • Automatic buffer recognition of US and European buffer sets
  • Selectable 2/4 wire cells for long cable length & wide measurement range
  • Store 50 sets of data in non-volatile memory
  • Conductivity auto range
  • Power down memory backup
  • Splash resistant/watertight case
  • Audio feedback keys
  • Battery/ac adaptor
  • RS-232 (Modbus) output

Specifications

pH Range
-2.00 to 16.00 pH
pH Resolution
0.01 pH
pH Accuracy
±0.01 pH ± 1 digit
ORP Range
-1999 to 1999 mV
ORP Resolution
1 mV
ORP Accuracy
±0.1 % F.S. ± 1 digit
Conductivity Range
0.00 to 200.0 mS/cm
Conductivity Resolution
0.01 uS/cm; 0.1 uS/cm; 1 uS/cm; 0.01 mS/cm; 0.1mS/cm
Conductivity Accuracy
±0.5% F.S.
TDS Range
0.00 ppm to 200.0 ppt
TDS Resolution
0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt
TDS Accuracy
±0.5% F.S.
Salinity Range
0.0 to 80.0 ppt
Salinity Resolution
0.1 ppt
Salinity Accuracy
±1% F.S.
Temperature Range
-5.0 to 100.0 °C
Temperature Resolution
0.1 °C
Temperature Accuracy
±0.3 °C ±1 digit
pH Buffer Recognition
US (4.01, 7.00, 10.01) or NIST (4.00, 6.86, 9.18)
pH Electrode Offset (Slope) Recognition
±100 mV at 7.00 pH or –91.7 to +108.3 mV at 6.86 pH / ±30% at 4.00, 4.01, 9.18 or 10.01 pH.
pH Temperature Compensation
Auto / manual -5.0 ~ 100.0 °C
pH Calibration
Up to 2 points
Conductivity Calibration
1 point
Input Impedance
>1013 ohms
Reference Temperature
From 15.0 to 25.0 °C (key selectable),default 25.0 °C
Temperature Coefficient
From 0.00 to 4.00 %, default 1.91 %.
TDS Factor
0.30 ~ 1.00, default 0.65
Cell Constant
0.475 (4 Wire) , 0.1 (2 Wire)
Output
RS-232 or RS-232 to USB (Modbus)
Memory Storage
50 sets
Power
6 X 1.5 Volt AAA batteries or 100 ~ 240 VAC adapter.
Operating Ambient Conditions
From 0 to 50 °C, at 90 % RH.
Weight
470 grams (Including batteries)
Dimensions (W x D x H)
83 x 241 x 71 mm

Documentation and Supports