pH/EC80
The pH/EC80 is one of the most advanced multi-parameter tester on the market. The tester has a large graphic LCD that simultaneously displays pH or EC measurement and temperature measurement. Users can store up to 50 memory data sets for recall and select degrees Celsius or Fahrenheit as the temperature unit of measure. In addition, the advanced hardware and the user-replaceable electrode module are protected by an IP-67 rated housing.
- Simultaneously measures pH, Conductivity, TDS, Salinity and temperature without switching probe
- Graphic LCD display
- Auto temperature compensation
- Switches between °C and °F
- Auto shut down feature
- Replaceable pH/Conductivity electrode module
- 50 sets of data memory
- IP67 waterproof
- Battery life >100hrs
- CE approved and RoHS compliant
Specifications
pH Range
0.00 to 14.00
pH Resolution
0.01
pH Accuracy
± 0.01 pH
Conductivity Range Range1
0 uS/cm to1999 uS/cm
Conductivity Resolution Range1
1 uS/cm
Conductivity Accuracy Range1
±1% F.S.
Conductivity Range 2
2.00 mS/cm to 20.00 mS/cm
Conductivity Resolution 2
0.01 mS/cm
Conductivity Accuracy 2
±1% F.S.
Salinity Range
0.0 to 10.0 ppt
Salinity Resolution
0.1 ppt
Salinity Accuracy
±1% F.S.
TDS Range 1
0 to 1999 mg/L
TDS Resolution 1
1 mg/L
TDS Accuracy 1
±1% F.S.
TDS Range 2
2.00 to 20.00 g/L
TDS Resolution 2
0.01 g/L
TDS Accuracy 2
±1% F.S.
Temperature Range 1
-5.0 to 60.0 °C
Temperature Resolution 1
0.1 °C
Temperature Accuracy 1
±0.5 °C
Temperature Range 2
23 to 140 °F
Temperature Resolution 2
0.1 °F
Temperature Accuracy 2
±0.9 °F
pH Calibration
1, 2 and 3 point calibration. Uses USA and NIST buffer sets.
Conductivity Calibration
1 point calibration
Temperature Compensation Range
-5.0 to 60.0 °C
Referemce Temperature
15 to 25 °C Default at 25 °C
Temperature Coefficient
0.00 to 4.00 %. Default at 1.91%/°C
TDS Constant
0.30 to 1.00, Default at 0.65
Temp Sensor
Thermistor, 10k ohms, at 25 °C
Temp Unit
°C and °F
Input Impedance
>1012 Ohms
Display
Graphic LCD
Storage of Calibration Data
Yes
Data Memory Storage
50 sets
Auto Shutoff
After 10 minutes of inactivity.
Power
4 x LR44 batteries
Case
IP67 water-tight case
Working Environment
0 to 50 °C, relative humidity < 95 %
Dimensions
200 × 44 × 25 mm
Weight
About 110 g (excluding batteries）
Documentation and Supports
Accessories
Related Products
pH618N
Testers pH TEMP
Worlds most advanced pH, temperature tester with date & time stamp and 50 memory data points.
3321
Inlines CON RES TEMP
Menu driven, sealed, backlit, conductivity controller with 2 relays and tinned lead connectors.
3621
Inlines ORP pH TEMP
Menu driven, sealed, backlit, pH/mV monitor/controller with 2 relays and tinned lead connectors.
3177MB Conductivity/Salinity/TDS/Temperature Based Bluetooth Benchtop
Benchtops CON SAL TDS TEMP
5th generation conductivity / salinity / TDS / temperature Bluetooth benchtop meter with iOS and Android tablet connectivity Renowned accuracy and repeatability Upgraded user experience and usability Improved electrode serviceability and low cost of ownership
6011M/6011EU pH/ORP/Temperature Basis Portable Meter
Portables ORP pH TEMP
The Basis Portable Series is Jenco’s latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements.
6177M/6177EU pH/ORP/Temperature Basis Benchtop Meter
Benchtops ORP pH TEMP
The Basis Series pH/ORP/temperature benchtop pH meter is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability. Renowned accuracy and repeatability...