Well-designed, Inside and Out
The Basis Portable Series is Jenco’s latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements. This series introduces Bluetooth or non-Bluetooth connectivity and a merging of the best features from our other series, which means we double down on reliability, usability and value.
Accurate, Reliable Measurements
- Up 2 point calibration (DO)
- Optical DO sensor
- Each and every unit is hand calibrated and QC’ed by at least 2 teams
- CE, RoHS complaint
Improved Usabiltiy
- Clear, large LCD
- Membrane buttons with tactile feedback On-device memory storage
- IP67 water-tight housing
- Removable, rugged protective case
- Inclined back for tabletop use
Other Meters In This Series
- Single and dual parameter pH, ORP, conductivity, TDS, salinity, dissolved oxygen,optical dissolved oxygen, pH/ORP/EC, pH/ODO
- Polarographic or optical DO
- Bluetooth and non-Bluetooth models
- With memory storage
- With or without protective case
Specifications
DO Range
0.00 to 20.00 mg/L
DO Resolution
0.01 mg/L
DO Accuracy
±1.5% of reading or ±0.15 mg/L, whichever is greater
DO% Saturation Range
0.0 to 200.0%
DO% Saturation Resolution
0.1%
DO% Saturation Accuracy
±1.5% of reading or ±1.5% air saturation, whichever is greater
Temperature Range
0.0 to 50.0 °C
Temperature Resolution
0.1 ℃
Temperature Accuracy
±0.3 °C
Pressure Compensation
500 to 1125 mBar
Salinity Compensation
0.0 to 40.0 ppt
Temperature Compensation
Auto 0 to 45 °C
Calibration
Up to 2 point
Data Memory
50 sets
Auto shut off
10 minutes of non-use
Electrode Type
Optical
Calibration Backup
Yes
Audio Feedback
All touch keys
Power Supply
9 Volt battery
Battery Life
50 hour battery life in manual mode
Ambient Temperature Range
0 to 50 °C
Relative Humidity
Up to 90%
Waterproof
IP67
Weight
290 g
Dimensions
214 X 74 X 42 mm; 216 X 80 X 50 mm (Have jacket)
Documentation and Supports
Accessories
Related Products
6312DTF/6312DTB
Inlines DO SAL TEMP
Dissolved Oxygen, Temperature In-line Analyzer. 1/4 DIN, IP65, panel mount DO/Temp analyzer with two sets of 2 wire 4 to 20 mA current output, 2 sets of programmable on/off relay, RS-485 output and backlight
9011M DO/Temperature Basis Portable Meter
Portables DO TEMP
The Basis Portable Series is Jenco’s latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements.
9173
Benchtops DO TEMP
Polarographic DO benchtop meter, water resistant with 8-pin DIN connector for DO and ATC.