Description
Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4 ~ 20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
- Bumpless calibration
- CE approved
- RS-485 output
- Programmable relays for conductivity
- Reversible and isolated 4 to 20 mA output
- Programmable relay for temperature
- Conductivity/temp. measurement & control
- Simultaneous analysis and display for measurement and controls
- User programmable reference temperature temperature coefficient
- Selectable 2-wire or 4-wire cells for long cable length & wide measurement range
Specifications
Conductivity Range
0.000 uS/cm to 300.0 mS/cm
Conductivity Resolution
0.001 μS/cm, 0.01 μS/cm, 0.1 μS/cm, 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm
Conductivity Accuracy
±0.5% F.S. ± 1 digit
TDS Range
0.000 ppm to 300.0 ppt
TDS Resolution
0.001 ppm, 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 ppt, 0.1 ppt
TDS Accuracy
±0.5% F.S. ± 1 digit
Temperature Range
-10.0 to 120°C
Temperature Resolution
0.1 °C
Temperature Accuracy
±0.3 °C
Reference Temperature
10 °C to 29 °C
Temperature Coefficient
0.00 % to 4.99%
TDS Factor
0.300 to 0.999
Basic Cell Constant
0.01, 0.10, 1.00 and 10.0
Cell Constant Range
±30% of basic cell constant
Output Relays Numbers
Two programmable high or low relays for conductivity, One programmable high or low relays for Temp.
Control Type
On/Off
Relay Output (Resistive Load Only)
5 amps at 115 VAC, 2.5 amps at 230 VAC
Relay Set Point Hysteresis
User programmable
Current Output
Isolated 4 to 20 mA
Accuracy
±0.02 mA
Isolated Voltage
500 VDC
Maximum Load
500 ohms
ATC Sensor
Thermistor 10k ohms at 25 °C
Security Protection
4digit password
Keypad
Audio feedback
Digital output
RS-485
Display
Graphic LCD w/backlight
Power source
115/230 VAC, 50/60 Hz
Dimensions
1/4 DIN, depth 148 mm
Weight
950 g